LoCAD10.1 - App Store
Sie können Ergebnisse sehen in einige Sekunden.
Herausgeberbeschreibung
LoCAD ist eine Software für den Entwurf und die Simulation digitaler Schaltungen.
Der besondere Schwerpunkt liegt auf der einfachen Erstellung und der graphischen Veranschaulichung der Funktion einer Schaltung.
Die Ein- und Ausgänge der Bauelemente können auf einfachste Art miteinander verdrahtet werden.
Im Normalfall reichen zwei Berührungen aus. Das System sucht selbstständig nach einem günstigen Weg.
Bei der Simulation ist es möglich, den Stromfluss zu beobachten und damit den zeitlichen Ablauf der Zustandsänderungen zu verfolgen.
Hierdurch wird das Verständnis der Arbeitsweise einer Schaltung gefördert und das Erkennen von Schaltungsfehlern erleichtert.
Es ist möglich, eigene Bausteine (ICs) mit beliebiger Schachtelungstiefe herzustellen. Hierdurch können praktisch beliebig große und
komplexe Schaltungen übersichtlich aufgebaut werden. Während der Simulation können die Zustandsänderungen in allen ICs beobachtet werden.
Eine ausführliche Anleitung hilft bei der Einarbeitung.
Über LoCAD
Das Unternehmen, das LoCAD entwickelt, ist Karl-Heinz Loch. Die neueste vom Entwickler veröffentlichte Version ist 10.1.
Um LoCAD auf Ihrem iOS-Gerät zu installieren, klicken Sie einfach auf die grüne Schaltfläche Weiter zur App oben, um den Installationsvorgang zu starten. Die App ist seit 2026-10-18 auf unserer Website gelistet und wurde 0 Mal heruntergeladen. Wir haben bereits geprüft, ob der Download-Link sicher ist; zu Ihrem eigenen Schutz empfehlen wir jedoch, die heruntergeladene App mit Ihrem Antivirusprogramm zu scannen. Ihr Antivirusprogramm kann LoCAD als Malware erkennen, wenn der Download-Link defekt ist.
So installieren Sie LoCAD auf Ihrem iOS-Gerät:
- Klicken Sie auf unserer Website auf die Schaltfläche Weiter zur App. Dadurch werden Sie zum App Store weitergeleitet.
- Sobald LoCAD im iTunes-Eintrag Ihres iOS-Geräts angezeigt wird, können Sie den Download und die Installation starten. Tippen Sie rechts neben der App auf die Schaltfläche LADEN, um den Download zu starten.
- Wenn Sie nicht in der iOS App Store App angemeldet sind, werden Sie nach Ihrer Apple-ID und/oder Ihrem Passwort gefragt.
- Nachdem LoCAD heruntergeladen wurde, sehen Sie rechts einen INSTALLIEREN-Button. Tippen Sie darauf, um die eigentliche Installation der iOS-App zu starten.
- Sobald die Installation abgeschlossen ist, können Sie auf die Schaltfläche ÖFFNEN tippen, um sie zu starten. Das Symbol wird außerdem zum Startbildschirm Ihres Geräts hinzugefügt.
Programmdetails
Systemanforderungen
Download-Informationen
Preisgestaltung
Versionsgeschichte
Version 10.1
veröffentlicht am 2026-10-18
Dieses Update behebt den Abbruch-Fehler beim Laden einer Schaltung.
Version 10.0
veröffentlicht am 2026-10-16
Version History This update includes adjustments to accommodate the new operating systems and stability improvements. 10.0 6d ago This update fixes
• the bug that prevents input and decision windows from being displayed in iOS 26
• the problem with loading and saving circuits caused by a change in iOS 26 9.3 Feb 21 This update fixes the bug that previously purchased full versions are not recorded correctly. 9.2 Feb 17 This update contains stability improvements.
Furthermore, the app can be tested for 7 days without any restrictions. After the trial period has expired, the app has the following restriction:
• Operation cannot be activated
In-app purchases that have already been made can of course be restored. 9.1 Feb 11 Due to a programming error in version 8.2.2, a continuous cycle on the iPad cannot be canceled with the on/off switch. 8.2.3 07/07/2025 This update fixes minor bugs and improves performance thanks to your feedback. 8.2.2 07/02/2025 This update
• prevents the incorrect error message “A problematic connecting line was found” that may occur in edit mode
• fixes an error caused by the adaptation to iPadOS 17.6.x when
> selecting lines in edit mode
> creating ICs
> stopping the clock generator via the stop input 8.2.1 10/03/2024 This update fixes the problem
• that in operating mode, the crosshairs only appear in the magnifying glass when it is moved slightly.
• that the new setting options (see version 8.0) can lead to irritating signal sequences when using a clock generator due to unfavorable overlapping. 8.2 10/01/2024 This update fixes the error
• that occurs in continuous clock mode for clock pulses with a phase setting of 1:12.
• that the buttons for cycles and frequency are not activated at the end of a cycle sequence. 8.1 09/26/2024 This update adds the following to the operating mode
• an option to specify a number of cycles that are executed as a cycle sequence using the continuous pulse button. If the number 0 is entered, normal continuous pulse mode is activated.
• an option to adjust the clock frequency. 8.0 09/13/2024 In this version
• fixes the delayed signal run error that occurs as of iPadOS 17.6.x
• the display in the large 7-segment display with decoder is adapted to hexadecimal coding (0000 → 0, 1001 → 9, 1010 → A, 1111 → F).
So that leading zeros can be hidden, the display is provided with an activation input A (top right).
When loading a circuit with the previous version, the activation input is automatically added. 7.7 09/07/2024 This update fixes a display error in the IC interior view.
Due to a programming error when hiding dummy leads (see version 7.0), some short leads that lead to component connections are not displayed in the internal view of ICs.
As this is only a display problem, it has no effect on the function of the ICs. 7.6 02/09/2024 This update fixes a display error in the LED matrix and contains further stability improvements. 7.5 02/02/2024 This update
• contains stability improvement
• adds a diode to the basic elements and an LED matrix and an enlarged seven-segment display with integrated decoder to the block elements.
This ensures the exchange of circuits between the macOS and iOS versions. 7.4 11/06/2023 This update contains some improvements for editing cutouts. 7.2 09/13/2023 This update
• improves the algorithm for automatic dragging of lines in connection with the basic element location options added in version 7.0.
• eliminates the short line pieces for creating gaps (see version 7.0) from the IC internal circuit 7.1 08/30/2023 This update contains the following changes:
• By popular request, the position options of the basic elements have been added, so that the outputs can now also be directed to the left and upwards. The desired position can be selected via the arrows in the second row.
• When creating ICs, input lines without a connection to a component that are a maximum of 3 grid units long are not drawn as a connection at the IC edge but are entered as a gap in the row of connections. 7.0 08/14/2023 This update
• fixes a problem that occurs when deleting nested ICs
• now also considers the possibly existing negation points at IC inputs when
initializing a circuit
• shows the exact delay value in the signal delay window. 6.4 07/29/2023 This update
• prevents the possible wrong positioning of ICs with a very short click on the touchpad
• fixes a bug when using negation points at IC outputs. 6.3 07/22/2023 This update removes a minor ambiguity regarding connection designations when creating ICs. 6.2 07/09/2023 This update fixes a bug regarding the language setting. 6.1 02/07/2023 Due to the problem with the text display when rotating in portrait orientation, which occurred in some cases, the rotate function is omitted from this version and the Book button is inserted instead.
This can be used to display the text selected under ‚Settings‘.
By using Mac Catalyst, this iPad app can now also be run on a Mac. However, this reduces the signal speed. 6.0 01/30/2023 This update speeds up the loading of complex circuits. 5.3 01/09/2022 • This update fixes a switching problem at AND and OR gates that can occur in special individual cases when two similar signals arrive at two inputs almost simultaneously.
• In this version, the switching behavior of the tri-state gates has been made more realistic and a matching short-circuit detection has been integrated.
If two connected tri-state outputs are activated, where one output is on H and the other on L, a short circuit exists.
To avoid unclear line conditions, care should be taken with the improved tri-state gates to ensure that an active gate is first deactivated before a gate connected to the same line is activated.
A circuit containing previous tri-state gates will still work.
• A detection of problematic connections (interconnection of outputs of two gates) has also been integrated, which is activated in the operation mode. 5.2 12/01/2021 This update prevents the program crash that could previously occur under special circumstances when the app was moved to the background after using the magnifying glass with the home button and later reactivated. 5.1.1 06/08/2021
Version 9.3
veröffentlicht am 2026-10-09
Version History This update fixes
• the bug that prevents input and decision windows from being displayed in iOS 26
• the problem with loading and saving circuits caused by a change in iOS 26 9.3 Feb 21 This update fixes the bug that previously purchased full versions are not recorded correctly. 9.2 Feb 17 This update contains stability improvements.
Furthermore, the app can be tested for 7 days without any restrictions. After the trial period has expired, the app has the following restriction:
• Operation cannot be activated
In-app purchases that have already been made can of course be restored. 9.1 Feb 11 Due to a programming error in version 8.2.2, a continuous cycle on the iPad cannot be canceled with the on/off switch. 8.2.3 07/07/2025 This update fixes minor bugs and improves performance thanks to your feedback. 8.2.2 07/02/2025 This update
• prevents the incorrect error message “A problematic connecting line was found” that may occur in edit mode
• fixes an error caused by the adaptation to iPadOS 17.6.x when
> selecting lines in edit mode
> creating ICs
> stopping the clock generator via the stop input 8.2.1 10/03/2024 This update fixes the problem
• that in operating mode, the crosshairs only appear in the magnifying glass when it is moved slightly.
• that the new setting options (see version 8.0) can lead to irritating signal sequences when using a clock generator due to unfavorable overlapping. 8.2 10/01/2024 This update fixes the error
• that occurs in continuous clock mode for clock pulses with a phase setting of 1:12.
• that the buttons for cycles and frequency are not activated at the end of a cycle sequence. 8.1 09/26/2024 This update adds the following to the operating mode
• an option to specify a number of cycles that are executed as a cycle sequence using the continuous pulse button. If the number 0 is entered, normal continuous pulse mode is activated.
• an option to adjust the clock frequency. 8.0 09/13/2024 In this version
• fixes the delayed signal run error that occurs as of iPadOS 17.6.x
• the display in the large 7-segment display with decoder is adapted to hexadecimal coding (0000 → 0, 1001 → 9, 1010 → A, 1111 → F).
So that leading zeros can be hidden, the display is provided with an activation input A (top right).
When loading a circuit with the previous version, the activation input is automatically added. 7.7 09/07/2024 This update fixes a display error in the IC interior view.
Due to a programming error when hiding dummy leads (see version 7.0), some short leads that lead to component connections are not displayed in the internal view of ICs.
As this is only a display problem, it has no effect on the function of the ICs. 7.6 02/09/2024 This update fixes a display error in the LED matrix and contains further stability improvements. 7.5 02/02/2024 This update
• contains stability improvement
• adds a diode to the basic elements and an LED matrix and an enlarged seven-segment display with integrated decoder to the block elements.
This ensures the exchange of circuits between the macOS and iOS versions. 7.4 11/06/2023 This update contains some improvements for editing cutouts. 7.2 09/13/2023 This update
• improves the algorithm for automatic dragging of lines in connection with the basic element location options added in version 7.0.
• eliminates the short line pieces for creating gaps (see version 7.0) from the IC internal circuit 7.1 08/30/2023 This update contains the following changes:
• By popular request, the position options of the basic elements have been added, so that the outputs can now also be directed to the left and upwards. The desired position can be selected via the arrows in the second row.
• When creating ICs, input lines without a connection to a component that are a maximum of 3 grid units long are not drawn as a connection at the IC edge but are entered as a gap in the row of connections. 7.0 08/14/2023 This update
• fixes a problem that occurs when deleting nested ICs
• now also considers the possibly existing negation points at IC inputs when
initializing a circuit
• shows the exact delay value in the signal delay window. 6.4 07/29/2023 This update
• prevents the possible wrong positioning of ICs with a very short click on the touchpad
• fixes a bug when using negation points at IC outputs. 6.3 07/22/2023 This update removes a minor ambiguity regarding connection designations when creating ICs. 6.2 07/09/2023 This update fixes a bug regarding the language setting. 6.1 02/07/2023 Due to the problem with the text display when rotating in portrait orientation, which occurred in some cases, the rotate function is omitted from this version and the Book button is inserted instead.
This can be used to display the text selected under ‚Settings‘.
By using Mac Catalyst, this iPad app can now also be run on a Mac. However, this reduces the signal speed. 6.0 01/30/2023 This update speeds up the loading of complex circuits. 5.3 01/09/2022 • This update fixes a switching problem at AND and OR gates that can occur in special individual cases when two similar signals arrive at two inputs almost simultaneously.
• In this version, the switching behavior of the tri-state gates has been made more realistic and a matching short-circuit detection has been integrated.
If two connected tri-state outputs are activated, where one output is on H and the other on L, a short circuit exists.
To avoid unclear line conditions, care should be taken with the improved tri-state gates to ensure that an active gate is first deactivated before a gate connected to the same line is activated.
A circuit containing previous tri-state gates will still work.
• A detection of problematic connections (interconnection of outputs of two gates) has also been integrated, which is activated in the operation mode. 5.2 12/01/2021 This update prevents the program crash that could previously occur under special circumstances when the app was moved to the background after using the magnifying glass with the home button and later reactivated. 5.1.1 06/08/2021 This update fixes the following issues:
• When deleting lines via the edit mode, possibly existing coupling diodes at vertical line sections are not removed. This does not affect the functionality of the circuit, but it looks irritating.
• When copying a section, an error occurs that can lead to a program crash. 5.1 02/02/2021
Version 9.3
veröffentlicht am 2026-02-21
This update fixes
• the bug that prevents input and decision windows from being displayed in iOS 26
• the problem with loading and saving circuits caused by a change in iOS 26
Version 8.2.3
veröffentlicht am 2025-07-06
Jul 6, 2025
Version 8.2.3
The error correction in the iPad version leads to a runtime improvement when switching off the continuous cycle.
Version 8.2.1
veröffentlicht am 2024-10-03
Oct 3, 2024
Version 8.2.1
This update
• prevents the incorrect error message “A problematic connecting line was found” that may occur in edit mode
• fixes an error caused by the adaptation to iPadOS 17.6.x when
> selecting lines in edit mode
> creating ICs
> stopping the clock generator via the stop input
Version 8.2
veröffentlicht am 2024-10-01
Oct 1, 2024
Version 8.2
This update fixes the problem
• that in operating mode, the crosshairs only appear in the magnifying glass when it is moved slightly.
• that the new setting options (see version 8.0) can lead to irritating signal sequences when using a clock generator due to unfavorable overlapping.
Version 8.0
veröffentlicht am 2024-09-13
Sep 13, 2024
Version 8.0
This update adds the following to the operating mode
• an option to specify a number of cycles that are executed as a cycle sequence using the continuous pulse button. If the number 0 is entered, normal continuous pulse mode is activated.
• an option to adjust the clock frequency.
Version 7.7
veröffentlicht am 2024-09-06
Sep 6, 2024
Version 7.7
In this version
• fixes the delayed signal run error that occurs as of iPadOS 17.6.x
• the display in the large 7-segment display with decoder is adapted to hexadecimal coding (0000 → 0, 1001 → 9, 1010 → A, 1111 → F).
So that leading zeros can be hidden, the display is provided with an activation input A (top right).
When loading a circuit with the previous version, the activation input is automatically added.
Version 7.6
veröffentlicht am 2024-02-09
Feb 9, 2024
Version 7.6
This update fixes a display error in the IC interior view.
Due to a programming error when hiding dummy leads (see version 7.0), some short leads that lead to component connections are not displayed in the internal view of ICs.
As this is only a display problem, it has no effect on the function of the ICs.
Haftungsausschluss
Offizieller App Store-Link
Wir hosten LoCAD nicht auf unseren Servern. Wir haben es nicht auf Viren, Adware, Spyware oder andere Arten von Malware gescannt. Diese App wird von Apple gehostet und hat deren Allgemeine Geschäftsbedingungen erfüllt, um dort gelistet zu werden. Wir empfehlen Vorsicht bei der Installation.
Der App-Store-Link für LoCAD wird Ihnen von apps112.com ohne jegliche Zusicherungen, Gewährleistungen oder Garantien zur Verfügung gestellt, greifen Sie daher auf eigene Gefahr darauf zu.
Bei Fragen zu dieser speziellen App wenden Sie sich bitte direkt an den Herausgeber. Bei Fragen zu den Funktionalitäten von apps112.com kontaktieren Sie uns.